(Please note that these instructions, along with your personal access code, will be sent via email prior to your arrival)

Dear Guest,

Welcome to our property.

Our property is protected by the eRentalLock. To access our property, you need to use the Access Code.

The eRentalLock Access Code is XXX-XXX-XXXX.

The property address is 261 Lakeview, Building C #10, Mammoth Lakes, CA. The Access Code is used to unlock the Front door.

Your Check-In time is on XX/XX/XX [m/d/y] at X :XX PM, and Check-Out time is on XX/XX/XX [m/d/y] at 10:00 AM.

Following is the operation instructions about how to use the Access Code.

Note: Press the [SCHLAGE] oval button to turn on the keypad backlight if necessary.

USING THE 10-DIGIT ACCESS CODE TO UNLOCK:
1. Enter the above 10-digit Access Code. Each digit must be entered within 10 seconds.
2. After hearing the ascending tone and while the [SCHLAGE] oval button flashing green light, please turn the lock knob within 5 seconds to unlock the door.

CREATE YOUR OWN 3 – 6 DIGIT PERSONALIZED CODE:
1. Choose a 3-6 digit Personalized Code to use during your stay.
2. Enter the above 10-digit Access Code.
3. After hearing the ascending tone and while the [SCHLAGE] oval button flashing green light, immediately (within 10 seconds) press the [SCHLAGE] oval button and key-in the 3-6 digit Personalized Code of your choice, then press the [SCHLAGE] oval button to finalize your own Personalized code.
Note:
a. Each digit must be entered within 10 seconds.
b. If your Personalized Code has been used by other user, you will hear the descending tone and see the [SCHLAGE] oval button flashing red. In this case, please try a new Personalized Code.

USING YOUR OWN PERSONALIZED CODE TO UNLOCK:
1). Enter your own Personalized Code. Each digit must be entered within 10 seconds.
2). Press the [SCHLAGE] oval button.
3). After hearing the ascending tone and while the [SCHLAGE] oval button flashing green light, please turn the lock knob within 5 seconds to unlock the door.

LOCK THE DOOR:
1. Press the [SCHLAGE] oval button.
2. After hearing the ascending tone and while the [SCHLAGE] oval button flashing green light, please turn the lock knob within 5 seconds to lock the door.


Following is the light & sound indication about operation status.

1. CORRECT OPERATION:
The lock will beep ascending tone and flash green light.

2. WRONG OPERATION:
The lock will beep descending tone and flash red light.

3. LOW BATTERY ALARM:
The lock will beep high and low tones alternatively and continuously flash red light after the lock is successfully opened. In this case, please report to us ASAP.

4. ENTER INACTIVE STATE:
The lock will enter inactive state for 30 seconds after entering 3 times wrong code in a row. After the inactive time has passed, the next wrong code will make the lock to enter inactive state for another 30 seconds.

Thank you for choosing our property. Please remember to collect all your personal belongings prior to your check out time as this code will only be valid up to that time and will expire.
Should you have any issues that come up please feel free to contact us.

Sincerely,

Property Owner